Brazing processes offer enhanced control, adaptability and cost-efficiency in the joining of materials. Unsurprisingly, this has lead to great interest and investment in the area. Drawing on important research in the field, Advances in brazing provides a clear guide to the principles, materials, methods and key applications of brazing.Part one introduces the fundamentals of brazing, including molten metal wetting processes, strength and margins of safety of brazed joints, and modeling of associated physical phenomena. Part two goes on to consider specific materials, such as super alloys,…mehr
Brazing processes offer enhanced control, adaptability and cost-efficiency in the joining of materials. Unsurprisingly, this has lead to great interest and investment in the area. Drawing on important research in the field, Advances in brazing provides a clear guide to the principles, materials, methods and key applications of brazing.Part one introduces the fundamentals of brazing, including molten metal wetting processes, strength and margins of safety of brazed joints, and modeling of associated physical phenomena. Part two goes on to consider specific materials, such as super alloys, filler metals for high temperature brazing, diamonds and cubic boron nitride, and varied ceramics and intermetallics. The brazing of carbon-carbon (C/C) composites to metals is also explored before applications of brazing and brazed materials are discussed in part three. Brazing of cutting materials, use of coating techniques, and metal-nonmetal brazing for electrical, packaging and structural applications are reviewed, along with fluxless brazing, the use of glasses and glass ceramics for high temperature applications and nickel-based filler metals for components in contact with drinking water.With its distinguished editor and international team of expert contributors, Advances in brazing is a technical guide for any professionals requiring an understanding of brazing processes, and offers a deeper understanding of the subject to researchers and engineers within the field of joining.Hinweis: Dieser Artikel kann nur an eine deutsche Lieferadresse ausgeliefert werden.
Produktdetails
Produktdetails
Woodhead Publishing Series in Welding and Other Joining Technologies
Dusan Sekulic is Professor of Mechanical Engineering at the University of Kentucky, Lexington, and Consulting Professor at Harbin University of Technology, China. Dr. Sekulic's research interests include heat exchange theory and design and transport phenomena for materials processing.
Inhaltsangabe
Contributor contact details
Preface
Part I: Fundamentals of brazing
Chapter 1: The wetting process in brazing
Abstract:
1.1 Introduction
1.2 Wetting of solids by liquid metals and oxides
1.3 Wetting versus brazing: general considerations
1.4 Brazing of metals and ceramics by non-reactive and reactive alloys
1.5 Conclusion
Chapter 2: Strength and margins of brazed joints
Abstract:
2.1 Introduction
2.2 Applicability of common failure criteria to analysis of brazed joints
2.3 Alternative approach for developing failure assessment diagrams (FADs)
2.4 Conclusion
2.5 Acknowledgements
Chapter 3: Modeling of the sequence of phenomena in brazing
Abstract:
3.1 Introduction
3.2 Modeling brazing systems
3.3 Finite element analysis of residual stresses in brazed structures
3.4 Micro-scale brazing phenomena modeling
3.5 Conclusions
Part II: Materials used in brazing
Chapter 4: Brazing of superalloys and the intermetallic alloy (Gamma-TiAl)
Abstract:
4.1 Introduction
4.2 Brazing of superalloys on a nickel base
4.3 Brazing of titanium aluminides
4.4 Conclusion
4.5 Future trends
Chapter 5: High-temperature brazing: filler metals and processing
Abstract:
5.1 Introduction
5.2 Features of base metal (BM) alloys used in high-temperature brazing
5.3 Brazing filler metals (BFMs) for joining high-temperature base metals
5.4 High-temperature base metal brazing
5.5 Metallurgical paths of joint formation
5.6 Industrial applications
Chapter 6: Brazing of diamonds and cubic boron nitride
Abstract:
6.1 Introduction
6.2 Physical properties of diamond and cubic boron nitride (CBN)
6.3 Diamond's interaction with metals
6.4 Diamond graphitization during annealing and brazing
6.5 Wetting of diamond by metals and alloys
6.6 Wetting of cubic boron nitride (CBN)
6.7 Brazing filler metals and techniques for diamond joining
6.8 Mechanical testing of diamond joints
6.9 Brazing of cubic boron nitride (CBN)
6.10 Brazed cubic boron nitride (CBN) products
6.11 Conclusion
Chapter 7: Brazing of oxide, carbide, nitride and composite ceramics
Abstract:
7.1 Introduction
7.2 Difficulties of brazing with ceramics and solutions
7.3 Brazing of oxide ceramics
7.4 Brazing of nitride ceramics
7.5 Brazing of carbide ceramics
7.6 Brazing of carbon-carbon (C/C) composites
7.7 Conclusion
Chapter 8: Brazing of nickel, ferrite and titaniumâ?"aluminum intermetallics
Abstract:
8.1 Introduction
8.2 Physical properties and brazing properties of Ni-Al system intermetallics
8.3 Physical properties and brazing properties of Fe-Al intermetallics
8.4 Physical properties and brazing properties of Ti-Al intermetallics
8.5 Brazing between Ti-Al intermetallics
8.6 Conclusion
Chapter 9: Brazing of aluminium and aluminium to steel
Abstract:
9.1 Introduction
9.2 Brazing aluminium and its alloys using reactive fluxes
9.3 Brazing of aluminium to stainless steel
9.4 Arc flux brazing of aluminium to galvanised steels
9.5 Soldering of aluminium
9.6 Conclusion and future trends
Chapter 10: Controlled atmosphere brazing of aluminum
Abstract:
10.1 Introduction
10.2 Applications of controlled atmosphere brazing (CAB) of aluminum
10.3 Materials involved in controlled atmosphere brazing (CAB) of aluminum
10.4 Oxide and flux
10.5 Controlled atmosphere brazing (CAB) process
10.6 Corrosion in controlled atmosphere brazing (CAB) brazed heat exchangers
Chapter 11: Active metal brazing of advanced ceramic composites to metallic
1.3 Wetting versus brazing: general considerations
1.4 Brazing of metals and ceramics by non-reactive and reactive alloys
1.5 Conclusion
Chapter 2: Strength and margins of brazed joints
Abstract:
2.1 Introduction
2.2 Applicability of common failure criteria to analysis of brazed joints
2.3 Alternative approach for developing failure assessment diagrams (FADs)
2.4 Conclusion
2.5 Acknowledgements
Chapter 3: Modeling of the sequence of phenomena in brazing
Abstract:
3.1 Introduction
3.2 Modeling brazing systems
3.3 Finite element analysis of residual stresses in brazed structures
3.4 Micro-scale brazing phenomena modeling
3.5 Conclusions
Part II: Materials used in brazing
Chapter 4: Brazing of superalloys and the intermetallic alloy (Gamma-TiAl)
Abstract:
4.1 Introduction
4.2 Brazing of superalloys on a nickel base
4.3 Brazing of titanium aluminides
4.4 Conclusion
4.5 Future trends
Chapter 5: High-temperature brazing: filler metals and processing
Abstract:
5.1 Introduction
5.2 Features of base metal (BM) alloys used in high-temperature brazing
5.3 Brazing filler metals (BFMs) for joining high-temperature base metals
5.4 High-temperature base metal brazing
5.5 Metallurgical paths of joint formation
5.6 Industrial applications
Chapter 6: Brazing of diamonds and cubic boron nitride
Abstract:
6.1 Introduction
6.2 Physical properties of diamond and cubic boron nitride (CBN)
6.3 Diamond's interaction with metals
6.4 Diamond graphitization during annealing and brazing
6.5 Wetting of diamond by metals and alloys
6.6 Wetting of cubic boron nitride (CBN)
6.7 Brazing filler metals and techniques for diamond joining
6.8 Mechanical testing of diamond joints
6.9 Brazing of cubic boron nitride (CBN)
6.10 Brazed cubic boron nitride (CBN) products
6.11 Conclusion
Chapter 7: Brazing of oxide, carbide, nitride and composite ceramics
Abstract:
7.1 Introduction
7.2 Difficulties of brazing with ceramics and solutions
7.3 Brazing of oxide ceramics
7.4 Brazing of nitride ceramics
7.5 Brazing of carbide ceramics
7.6 Brazing of carbon-carbon (C/C) composites
7.7 Conclusion
Chapter 8: Brazing of nickel, ferrite and titaniumâ?"aluminum intermetallics
Abstract:
8.1 Introduction
8.2 Physical properties and brazing properties of Ni-Al system intermetallics
8.3 Physical properties and brazing properties of Fe-Al intermetallics
8.4 Physical properties and brazing properties of Ti-Al intermetallics
8.5 Brazing between Ti-Al intermetallics
8.6 Conclusion
Chapter 9: Brazing of aluminium and aluminium to steel
Abstract:
9.1 Introduction
9.2 Brazing aluminium and its alloys using reactive fluxes
9.3 Brazing of aluminium to stainless steel
9.4 Arc flux brazing of aluminium to galvanised steels
9.5 Soldering of aluminium
9.6 Conclusion and future trends
Chapter 10: Controlled atmosphere brazing of aluminum
Abstract:
10.1 Introduction
10.2 Applications of controlled atmosphere brazing (CAB) of aluminum
10.3 Materials involved in controlled atmosphere brazing (CAB) of aluminum
10.4 Oxide and flux
10.5 Controlled atmosphere brazing (CAB) process
10.6 Corrosion in controlled atmosphere brazing (CAB) brazed heat exchangers
Chapter 11: Active metal brazing of advanced ceramic composites to metallic
Rezensionen
"Drawing on important recent research in the field of soldering, this book provides a clear guide to the basic principles, materials, methods, and the main applications.With its author and the international team of expert contributors, the book is a technical guide for all professionals who require a study on May brazing processes." --WeldingLibrary.com, January 2014
"A great primary source of scientific and practical information., " --Welding Journal
Es gelten unsere Allgemeinen Geschäftsbedingungen: www.buecher.de/agb
Impressum
www.buecher.de ist ein Internetauftritt der buecher.de internetstores GmbH
Geschäftsführung: Monica Sawhney | Roland Kölbl | Günter Hilger
Sitz der Gesellschaft: Batheyer Straße 115 - 117, 58099 Hagen
Postanschrift: Bürgermeister-Wegele-Str. 12, 86167 Augsburg
Amtsgericht Hagen HRB 13257
Steuernummer: 321/5800/1497
USt-IdNr: DE450055826
