AD Rollett

Ceramic Transactions, Volumes 200 & 201 Set

Herausgeber: Rollett, A D

• Gebundenes Buch

Produktbeschreibung

Ceramic Transactions (CTs) books contain papers presented at the Annual Meeting of the American Ceramic Society, other regional and division conferences, as well as meetings held by related societies and organizations. Volumes 200 and 201 contain papers presented at The 15th International Conference on the Texture of Materials from June 1-5th, 2008 in Pittsburgh, PA.

Produktdetails

• Verlag: Wiley
• Seitenzahl: 1648
• Erscheinungstermin: 1. November 2008
• Englisch
• Abmessung: 244mm x 165mm x 91mm
• Gewicht: 2567g
• ISBN-13: 9780470474181
• ISBN-10: 0470474181
• Artikelnr.: 26488187

Autorenporträt

A.D. Rollett obtained an M.A. in Metallurgy and Materials Science from Cambridge University, England in 1977 and a Ph.D. in Materials Engineering from Drexel University in 1987. He worked for the Los Alamos National Laboratory for sixteen years, rising to be the Deputy Director of the Materials Science & Technology Division in 1994. He then moved to Carnegie Mellon University to be the Department Head in Materials Science & Engineering until 2000. He is active in the Materials Research Science & Engineering Center at CMU and is the Focal Area Point of Contact for Computational Chemistry & Materials for the DoD.

Inhaltsangabe

Materials Processing and Texture TOC:
Preface xv
Acknowledgments xvii
Friction Stir Welding and Processing
Texture Evolution during Friction Stir Welding of Stainless Steel 3
Jaehyung Cho
Texture Development in Aluminum Friction Stir Welds 17
Richard W. Fonda, Keith E. Knipling, John F. Bingert, Anthony P. Reynolds,
Wei Tang, Kevin J. Colligan, and John A. Wert
Microstructural Studies of a Friction-Stir-Welded AA5052 29
N. T. Kumbhar, Santosh. K. Sahoo, R. Tewari, G. K. Dey, I. Samajdar, and K.
Bhanumurthy
Effect of Microstructure on Mechanical Properties of Friction-Welded Joints
between Aluminum Alloys (6061, 5052) and 304 Stainless Steel 35
Í. T. Kumbhar, A. Laik, G. K. Dey, Ê. Bhanumurthy, J. Krishnan, D. J.
Derose, R. L. Suthar, S. K. Sahoo, and I. Samajdar
Effect of Texture on Fracture Limit Strain in Friction Stir Processed
AZ31F3Mg Alloy 43
Yutaka S. Sato, Akihiro Sugimoto, Hiroyuki Kokawa, and Chang-Woo Lee
Microstructure and Texture Analysis of Friction Stir Welds of Copper 53
T. Saukkonen., K. Savolainen, J. Mononen, and H. Hänninen
Texture and Anisotropy In Steels
The Effects of Texture on the Corrosion Resistance of SS304 Stainless Steel
63
M. Azzi and J. A. Szpunar
Microstructural Characterization of Dual Phase Steels by Means of Electron
Microscopy 71
Liesbeth Barbé and Kim Verbeken
Grain Size Effect on the Tensile Behavior of a FeMnC TWIP Steel in Relation
with the Microstructure and Texture Evolutions 79
David Barbier, Nathalie Gey, Alain Sébastien, and Michel Humbert
Combination of Two X-Ray Diffraction Settings for Determining the Texture
of Small Sheared Samples 87
D. Barbier, Â. Bolle, J. J. Fundenberger, C. Laruelle, and A. Tidu
Texture of Non-Oriented Rolled Steels by X-Ray and Electron Diffraction 95
Martin Öernik, Milos Predmersky, Andrej Lesko, and Erik Hilinski
Effect of Coating Texture on Powdering Behavior of Industrially Produced
Galvannealed Coating on IF, IFHS and HSQ Grade Steels 103
A. Chakraborty, R.K. Ray, and D. Bhattacharjee
Including Elastical Anisotropy Due to Texture in a Finite Element Model for
the Prediction of Residual Stresses in Welds 115
Koen Decroos, Carsten Ohms, and Yvan Houbaert
Texture and Microstructure Evolution in a Fe-Si CGO Sheet during the
Processing Route before Secondary Recrystallization 123
Francisco Cruz-Gandarilla, Richard Penelle, Thierry Baudin, Hector Mendoza
Leon, and J. G. Cabanas-Moreno
TEM Study of the Inhibition Layer of Commercial Hot-Dip Galvanized Steels
131
Jack Elia, Å. Petit, J -S Lecomte, B. Gay, and V. Pitchon
Measurement of the Texture Sharpness in Grain-Oriented Electrical Steels
143
M. Frommert, C. Zobrist, D. Raabe, S. Zaefferer, and L. Lahn, Á. Böttcher
Effects of Composition and Coiling Temperature on Precipitation and Texture
Formation in a Few Interstitial Free High Strength Steels 151
Pampa Ghosh and R Ê Ray
Microstructure and Texture Development in Warm Rolled High Strength IF
Steels Containing Cu, Ñ and  161
Arunansu Haldar and Chiradeep Ghosh
Effect of Tin on the Texture of Nonoriented Electrical Steels 173
Chun-Kan Hou, Tong- Han Lee, and Chun-Chih Liao
Effect of Cold Rolled Reduction on the Texture and Plastic Strain Ratio of
2205 Duplex Stainless Steel 183
Chun-Kan Hou and Chang-Chia Liu
Importance of Dislocation Substructures in Texture Control of Low Carbon
Steel 193
Hirosuke Inagaki
Texture Control in Manufacturing Current and Future Grades of Low-Carbon
Steel Sheet 207
Leo A.I. Kestens and Roumen Petrov
Relative Preference for Strain Localizations in Ultra Low Carbon Steel 217
R. Khatirkar, L.A.I. Kestens, R. Petrov, and I. Samajdar
Influence of Texture on Surface-Roughening during Press Forming in Ti Added
High Purity Ferritic Stainless Steel Sheets 223
Ken Kimura, Masaharu Hatano, and Akihiko Takahashi
Effect of Tin on the Recrystallization Behavior and Texture of Grain
Oriented Electrical Steels 231
Chun-Chih Liao, Chun-Kan Hou
EBSD Investigation of Phase Transformation in Low Carbon Steels 243
Sophie Lubin, Anne-Françoise Gourgues-Lorenzon, Hélène Regle, Frank
Montheillet, and Brigitte Bacroix
A Monte-Carlo Algorithm for the Zener Drag Effect in the Fe-3%Si Magnetic
Alloys 251
N. Maazi, R. Penelle, A. L. Etter, and T. Baudin
Effect of Strain and Strain Path on Deformation Twinning and Strain Induced
Martensite in AISI 316L and 304L Austenitic Stainless Steel 257
S. K. Mishra, P. Pant, K. Narasimhan and I. Samajdar
Analysis of the Formation and Growth of Recrystallizing Grains in IF Steels
by In-Situ EBSP 265
H. Nakamichi and F. J. Humphreys
Stability of Secondary Recrystallization in Grain-Oriented Silicon Steel
275
Eiichi Namba, Satoshi Arai, Hotaka Homma, and Yoshiyuki Ushigami
A Practical Investigation into Identifying and Differentiating Phases in
Steel using Electron Backscatter Diffraction 285
Matthew M. Nowell, Stuart I. Wright, and John O. Carpenter
Influence of Precipitate Distribution on Normal Grain Growth Simulation at
the Beginning of the Secondary Recrystallization Annealing in a Fe-3%Si
Electrical Steel HiB - Role of the MnS and AIN Precipitates 293
C. Sekkak, N. Rouag, and R. Penelle
Microstructure and Texture Development during Cold Ring Rolling of 100Cr6
301
K. Ryttberg, M. Knutson Wedel, L. Nyborg, and P. Dahlman
Development of Texture, Microstructure and Grain Boundary Character
Distribution after Heavy Cold Rolling and Annealing in a Boron Added
Interstitial Free (IF) Steel 311
Rajib Sana and R. K. Ray
Texture of Nb-Containing Ferritic Stainless Steel after Secondary
Recrystallization 317
Rodrigo P. Siqueira, Hugo R. Z. Sandim, and Tarcisio R. Oliveira
Quantitative Prediction of Transformation Texture in Hot-Rolled Steel
Sheets by Multiple KS Relation 325
Toshiro Tomida, Masayuki Wakita, Mitsuru Yoshida, and Norio Imai
Crystallographic Characterization of a Phosphorus Added TRIP Steel 333
Kim Verbeken, Liesbeth Barbé, and Dierk Raabe
Microstructural and Textural Evolutions in a Cold Rolled High Mn TWIP Steel
341
Kim Verbeken, Lieven Bracke, Leo Kestens, and Jan Penning
Stored Energy Evolution in a Cold-Rolled IF Steel 349
A. Wauthier, B. Bacroix, T. Chauveau, O. Castelnau, and H. Réglé
A Comparison of Texture Measurements Via EBSD and X-RAY 357
Stuart I. Wright and Matthew M. Nowell
The Measurement Approach of X-Ray Residual Stress in Fe-Ni Alloy with
Different Textures 365
Qiulin Wu, Xiaojun Hu, Zuming Fu, Haiyan Zhao, Bing Zhang, Yong Wang, Wei
Fang, and Limin Li
Influence of Grain Orientation on Magnetic Aging Behavior of a Non-Oriented
Silicon Steel Sheet 371
L. Xu, W. Mao, P. Yang, and H. Feng
Effects of Magnetic Fields
Eutectoid Point Shift and Orientation Relationships between Ferrite and
Cementite in Pearlite in a High Magnetic Field 381
Y. D. Zhang, C. Esling, H. Klein, X. Zhao, and L. Zuo
Characteristics of Recrystallization Texture of Cold-Rolled IF Steel Sheet
Annealed with a Magnetic Field in the Transverse Direction 389
Yan Wu , Changshu He, Yudong Zhang, Xiang Zhao, Liang Zuo, and Claude
Esling
Crystallographic Features during Martensitic Transformation in Ni-Mn-Ga
Ferromagnetic Shape Memory Alloys 397
D. Y. Cong, Y. D. Zhang, C. Esling, Y. D. Wang, X. Zhao, and L. Zuo
Grain Boundary Misorientation and CSL in Magnetically Annealed Fe-0.75%Si
405
C.M.B. Bacaltchuk, G.A. Castello-Branco, and H. Garmestani
The Effect of Ultra-High Magnetic Fields on Grain Growth and
Recrystallization in Metals 413
A.D. Sheikh-Ali and H. Garmestani
New Approach to Texturing and Grain Boundary Engineering by Magnetic Field
Application 421
Tadao Watanabe, Sadahiro Tsurekawa, Yudong Zhang, Xiang Zhao, Liang Zuo,
and Claude Esling
Effects of Magnetic Field Direction on Texture Evolution in a Cold-Rolled
IF Steel Sheet during High Magnetic Field Annealing 435
Yan Wu, Changshu He, Xiang Zhao, and Liang Zuo
Hexagonal Metals
Electrochemical Behavior of (001), (100) and (110) Ti Single Crystals under
Simulated Body Fluid Condition 443
M. Azzi, S. Faghihi, M. Tabrizian, and J. A. Szpunar
Identification and Rationalization of Secondary Twin Variants in a
Magnesium Alloy 451
M. R. Barnett and P. Cizek
Textures in HCP Titanium and Zirconium: Influence of Twinning 461
Nathalie Bozzolo and Francis Wagner
Texture and Microstructure Evolution during Asymmetric Rolling of Mg Alloys
473
Jaehyung Cho, Hyung-Wuk Kim, and Suk-Bong Kang
Prediction of Anisotropic Properties in Mg Alloy Sheets Using the Crystal
Plasticity Finite Element Method 483
S.-H. Choi, J.K. Choi, H.W. Lee, and D.H. Kim
Strain Hardening Behaviour of an Initially Textured TI6AL4V Titanium Alloy
as a Function of Strain Rate and Compression Direction 491
Frederik Coghe, Luc Rabet, and Paul Van Houtte
Texture Evolution during the Static Recrystallization of Three Binary Mg-Y
Alloys 501
R. Cottam, J. Robson, G. Lorimer, and B. Davis
Grain Size and Orientation Distribution Function of High Purity á-Titanium
509
Bradley S. Fromm, Brent L. Adams, Sadegh Ahmadi, and Marko Knezevic
Textures in Titanium Alloys - An Industrial Perspective on Deformation,
Transformation and Properties 521
David Rugg, David Furrer, and Nigel Brewitt
Annealing Related Microstructural Developments in a Two-Phase ZR-2.5 Nb
Alloy 533
V.D. Hiwarkar, S.K. Sahoo, I. Samajdar, K. Narasimhan, Ê. V. Mani krishna,
G.K. Dey, D. Srivastav, R. Tiwari, and S. Banarjee
Texture Aspects of Delayed Hydride Cracking in Products from Zr-Based
Alloys 539
Margarita Isaenkova and Yuriy Perlovich
Effect of Twinning on the Strain Hardening Behaviors of Two Mg Alloys
Deformed Along Four Different Strain Paths 547
L. Jiang and J.J. Jonas
EBSD Study of Annealing Rolled Zirconium 555
L. Jiang, M.T. Pérez-Prad, O.A. Ruan, and M.E. Kassner
Texture Evolution during Multi-Pass Equal Channel Angular Extrusion of
Beryllium 563
Saiyi Li, David J. Alexander, Irene J. Beyerlein, and Donald W. Brown
A Mechanism of Determining the Formability of AZ31 near Room Temperature
571
Hualong Li, Emilie Hsu, and Jerzy Szpunar
An EBSD Study of the Misorientations Related to Dynamic Recrystallization
in Mg AM30 Deformed At High Temperatures 577
Etienne Martin, Stéphane Godet, Lan Jiang, Abdelbaset Elwazri, Pascal J.
Jacques, and John J. Jonas
Texture Evolution in Boron Modified Ti-6AI-4V Alloy 585
Shibayan Roy, Nilesh Gurao, Satyam Suwas, S. Tamirisakandala, R.
Srinivasan, and D.B. Miracle
Heterogeneous Deformation in Single-Phase Zircaloy 2 593
S. Ê. Sahoo, V. D. Hiwarkar, I. Samajdar, P. Pant, D. Srivastav, R. Tewari,
G. K. Dey and S. Banerjee
Texture of Magnesium Alloy Sheets Heavily Rolled by High Speed Warm Rolling
601
Tetsuo Sakai, Satoshi Minamiguchi, Hiroaki Koh, and Hiroshi Utsunomiya
Microstructure and Texture Gradient in Titanium Severely Strained by
Friction Roll Processing and Subsequent Annealing 609
Meiqin Shi, Tomohiro Umetsu, Yoshimasa Takayama, Hajime Kato, and Hideo
Watanabe
Evolution of Transformation Texture in a Metastable ß-Titanium Alloy 617
Satyam Suwas, Nilesh P. Gurao, Ashkar Ali
Dislocations in Textured Mg-4.5%AI-1 %Zn Alloy: TEM and Statistical Studies
629
V.N. Timofeev, V.N. Serebryany, and Yu A. Zaliznyak
Microstructure and Micro-Texture Evolution of Compression Twins in
Magnesium 637
P. Yang, L. Meng, ×. Li, W. Mao, and L. Chen
Texture In Materials Design
Accessing the Texture Hull and Properties Closure by Rotation and
Lamination: Results in the Primitive Basis of Dilation Functions 647
Brent L. Adams and David T. Fullwood
Correlation Relationship between Yield Strength and the Elastic Compliance
for the Polycrystalline Nickel 201 657
Sadegh Ahmadi, Brent L. Adams, David T. Fullwood, and Bradley S. Fromm
Modeling Rolling Texture of Twinned Cu Single Crystals 665
Khaled Al-Fadhalah, Armand Beaudoin, and Marek Niewczas
Multiscale Modeling of Equal Channel Angular Extruded Aluminum with Strain
Gradient Crystal Plasticity and Phenomenological Models 671
L. Duchêne, M.G.D. Geers, W.A.M. Brekelmans, E. Chen, B. Verlinden, and
A.M. Habraken
Effect of Deformation Constraints on the Texture Formation in Al-5mass%Mg
Solid Solution at High Temperatures 679
Kazuto Okayasu, Masayuki Sakakibara, and Hiroshi Fukutomi
Spectral Methods in the Statistical Description and Design of
Microstructure 687
D.T. Fullwood, B.L. Adams, K.A. Stevens, S.R. Niezgoda, and S.R. Kalidindi
A Comparison of Deformation Textures and Mechanical Properties Predicted by
Different Crystal Plasticity Codes 701
Craig S. Hartley, Paul R. Dawson, Donald E. Boyce, Surya R. Kalidindi,
Marko Knezevic, Carlos Tomé, Ricardo Lebensohn, S. Lee Semiatin, Todd J.
Turner, and Ayman A. Salem
Simulation of Texture Development in Pure Aluminum Deformed by Equal
Channel Angular Pressing 713
Majid Hoseini, Mahmood Meratian, Hualong Li, and Jerzy Szpunar
Plastic Heterogeneity Due to Grain Boundaries and Its Influence on Global
Deformation Textures 721
Anand Ê Kanjarla, Paul Van Houtte, and Laurent Delannay
On the Correlation of Surface Texture and Strain Induced Surface Roughness
in AA6XXX Aluminum Sheet 731
S. Küsters, M. Seefeldt, and P. Van Houtte
The Variation Range for the Results of FCC Texture Simulations Based on
{111 } Slip 743
Torben Letters
Development of Low Magnetism and Strongly Cube-Textured Composite
Ni-7%W/Ni-10%W Substrate for Coated Superconductor 751
Dan-min Liu, Fei Hao, Jiu-xing Zhang, Yan-cao Hu, Mei-ling Zhou, and
Wei-peng Liu
Two-Point Orientation Coherence Functions: An Orthonormal Series Solution
759
Peter R. Morris
The Influence of Shear Bands on Microtexture Evolution in Polycrystalline
Copper 765
H. Paul and J.H. Driver
Influence of Dislocation Stress on the Corrosion Behavior of (111) and
(123) Surface Plane of Aluminum Single Crystal 775
Dashi Pei, Weimin Mao, and Huiping Feng
Texture Randomization by Intense Shearing in Layered AI and AI (0.3%Sc)
ARB-Processed Sheet 783
M.Z. Quadir, O. Al-Buhamad, L. Bassman, and M. Ferry
Texture Development of Molybdenum Sheets during Last Step of Heat Treatment
791
C.-G. Oerrel, I. Hünsche, W. Skrotzki, A. Lorich, and W. Knabl
Solute, Superplasticity and Texture Change in Aluminium Alloys 801
K. Sotoudeh, P.S. Bate, and F.J. Humphreys
Texture-Based Plastic Potentials in Stress Space 809
Albert Van Bael, Sampath K. Yerra, Paul Van Houtte, and Albert Van Bael
Hierarchical Multi-Level Modelling of Plastic Anisotropy using Convex
Plastic Potentials 817
Paul Van Houtte, Sampath K. Yerra, and Albert Van Bael
Author Index 827
Applications of Texture Analysis TOC:
Preface xv
Acknowledgments xvii
THIN FILMS (MICROELECTRONICS, HTSC)
The Texture of Thin Nisi Films and Its Effect on Agglomeration 3
K. De Keyser, C. Detavernier , R. L. Van Meirhaeghe, J. Jordan-Sweet, and
C. Lavoie
Epitaxial Substrates from Ni-Based Ternary Alloys With Cr and W 11
D.P. Rodionov, I.V. Gervasyeva, Yu.V. Khlebnikova, and V.A. Kazantsev
Cube Texture Formation in Ni-Pd and Ni-Pd-W Alloys For HTS Tapes 23
I.V. Gervasyeva, D.P. Rodionov, Yu.V. Khlebnikova, G.A. Dosovitskii, and
A.R. Kaul
Texture of Rapidly Solidified Cu Thin Films Studied by SEM EBSD and TEM 35
R. Zhong, A. Kulovits, J.M.K. Wiezorek, and J.P. Leonard
Control of Texture in Polycrystalline Thin Films Used as Data Storage Media
47
David E. Laughlin, Hua Yuan, En Yang, and Chun Wang
Influences of Processing Parameters on Microstructures and Microtextures of
Au Flip Chip Bonds During Microelectronics Packaging 57
P Yang, C-M Li, D-M Liu, M Hung, M Li, and W-M Mao
TEXTURE AT NON-AMBIENT CONDITIONS
In Situ Observation of Texture Evolution in Ti-10-2-3 65
Seerna L. Raghunathan, Richard Dashwood, Martin Jackson, Sven Vogel, and
David Dye
Study of Texture Evolution at High Strain Rates in FCC Materials 73
Nilesh Gurao, Satyam Suwas, and Rajeev Kapoor
Texture and Microstructure Development in Copper after Cryogenic Rolling
and Heat Treatment 83
A. Haldar, D. Das, and P.P. Chattopadhyay
In-Situ EBSD Study of the a-y-a Phase Transformation in a Microalloyed
Steel 95
Lischewski, D. M. Kirch, A. Ziemons, and G. Gottstein
Texture Changes during Phase Transformations Studied In Situ With Neutron
Diffraction 103
Hans-Rudolf Wenk
NOVEL TEXTURE MEASUREMENT TECHNIQUES INCLUDING 3D
Three-Dimensional FIB-OIM of Ceramic Materials 117
Shen J. Dillon and Gregory S. Rohrer
Comparison of X-Ray and EBSD Textures for Back-Annealed AI-Mg Alloys 125
0. Engler
A New Method for Quantification of Texture Uniformity of Plate 135
Peter Jepson and Robert Bailey
Separating Coincident Electron Backscatter Diffraction Patterns Near
Interfaces 147
Josh Kacher, Brent L. Adarns, David Fullwood, and Colin Landon
Rapid Texture Determination Based on Two Dimensional X Ray Detector 155
Weimin Mao
Semiautomatic Determination of Orientations and Elastic Strain from Kossel
Microdiffraction 163
Adam Morawiec, Raphael Pesci, and Jean-Sebastien Lecomte
Statistically Reliable EBSD Analysis Method of Grain Boundary
Characterization 171
D.H. Kim, J.Y.Kang, D.I. Kim, E.K. Her, S.J. Kim, H.N. Han, K.H. Oh, and
H.C. Lee
> AI-0.3% Mn Single Crystal 181
H. Paul, J.H. Driver, and CI. Maurice
Three Laws of Substructure Anisotropy of Textured Metal Materials, Revealed
by X-Ray Method of Generalized Pole Figures 189
Yuriy Perlovich, Margarita Isaenkova, and Vladimir Fesenko
3D-Microstructural and Texture Characterization in Different Length Scales
197
Roumen Petrov and Patricia Gobernado Hernandez, Orlando Leon Garcia, Hemant
Sharma, and Leo Kestens
Local Crystal Rotations of Bulk Grains by High-Resolution EBSD during Hot
PSC of AI-0.1 % Mn Polycrystals 205
Romain Quey, David Piot, and Julian Driver
Grain Boundary Orientations in a Fe-Mn-Cu Polycrystalline Alloy 213
M. Takashima and P. Wynblatt
Development of a TEM-Based Orientation Microscopy System 221
S. Zaefferer and G. Wu
COMPLEX OXIDES AND OTHER COMPOUNDS
Domain Control Effect on Voltage-Strain in BaTi03 Single Crystal 231
Yoshio Akimune, Kazuo Matsuo, Ryutaro Oishi, and Akira Okada
Tentative Simulation of Crystal Rotation for NaCl Structures 239
Hiroaki Masui
INTERFACE TEXTURES
Grain Boundary Patterns in Dynamically Recrystallized Quartz Aggregates 251
Cristiane Castro and Leonardo Lagoeiro
The Correlation between Grain Boundary Character and lntergranular
Corrosion Susceptibility of
2124 Aluminum Alloy 261
L. H. Chan, H. Weiland, S. Cheong, G.S. Rohrer, and AD. Rollett
Rodrigues-Frank Spaces for Misorientations and Orientation Relationships
between Crystals of Any Two Crystallographic Point Groups 269
Youliang He and John J. Jonas
Origins of Texture Memory in Steels 281
Bevis Hutchinson and Leo A.I. Kestens
A Grain Boundary Analysis of Cemented Tungsten Carbides using OIM 291
Vineet Kumar, Zhigang Zak Fang, S.I. Wright and M.M. Nowell
The Effect of Grain and Phase Boundary Misorientation on Nucleation during
Solid-state Phase Transformations in a Co-l5Fe Alloy 305
H. Landheer, S.E. Offerman, and L.A.I. Kestens, T. Takeuchi, M. Enomoto,
and Y. Adachi
Microstructural Modification in a 150-1 5Ni-2.2 Mo-Ti Modified Austenitic
Stainless Steel through Twin Induced Grain Boundary Engineering 313
Sumantra Mandal, P.V. Sivaprasad, and V. Subramanya Sarrna
Effect of Strain Path and Annealing on Development of Resistance to
lntergranular Degradation in Austenitic Stainless Steels 323
V. Randle, R. Jones, T.J. Marrow, and D. Engelberg
Evolution of the Grain Boundary Character Distribution in Strontium
Titanate during Grain Growth 335
Herbert M. Miller and Gregory S. Rohrer
A Model for the Origin of Anisotropic Grain Boundary Character
Distributions in Polycrystalline Materials 343
Gregory S. Rohrer, Jason Gruber, and Anthony D. Rollett
Nucleation of the Primary A1 Phase on TiA13 during Solidification of a
Hot-Dip Zn-1 1% A1-3%Mg-On2%SCi oating on Steel Sheet 355
Kazuhiko Honda, Kohsaku Ushioda, and Wataru Yamada
RECRYSTALLIZATION TEXTURE: RETROSPECTIVE VERSUS CURRENT PROBLEMS
Textural lnhomogeneity Effect during the Monte Carlo Simulation of the
Abnormal Goss Grain Growth in Fe-3%Si Steel Grade HiB 365
T. Baudin, R. Penelle, and D. Ceccaldi
Avoiding Roping and Ridging in AA6XXX Sheets: Characterizing the Initial
State 373
T.A. Bennett, R.H. Petrov, and L.A.I. Kestens
Development of Cube Texture in Cold-Rolled and Annealed Multilayer Tapes
for Coated Superconductor Applications 381
P.P. Bhattacharjee and R.K. Ray
Effects of Elastic Modulus on Deformation and Recrystallization of High
Purity Nb 391
D. Baars, H. Jiang, T.R. Bieler, A. Zamiri, F. Pourboghrat, and C. Compton
Through-Process Texture Modeling of AA6016 from Hot Rolling to Final
Annealing 399
C. Bollmann and G. Gottstein
Cube Texture Due to Dynamic Recrystallization in Pb and Pb-62%Sn Alloys
under Equal Chanel Angular Extrusion Processing 409
R.E. Bolmaro, V.L. Sordi, M. Ferrante, WeiMin Gan, and H.-G. Brokmeier
Annealing Texture Evolution 421
I.L. Dillamore
On the Stability of Recrystallization Textures in Low Alloyed Zirconium
Sheets 429
FranCois Gerspach, Nathalie Bozzolo, and Francis Wagner
An Analysis of the Texture and Mean Orientation of Aluminium Alloy AA5052
Subjected to Forward and Reverse Hot Torsion and Subsequent Annealing 437
0. Hernandez-Silva, B.P. Wynne, and W. M. Rainforth
Evolution of { l l l } Recrystallization Texture in Al-Mg-Si Alloy Sheets
Processed by Symmetric and Asymmetric Combination Rolling 445
Hirofumi Inoue, Satoshi Kobayashi, Masayuki Hori, Toshio Komatsubara, and
Takayuki Takasugi
Effect of External Constraint and Deviation from Ideal Orientation on
Development of Rolling Texture in Pure Aluminum Single Crystal Having {loo}
Orientation 453
Keizo Kashihara and Hirosuke lnagaki
Nucleation and Growth of New Grains in Deformed Quartz Single Crystals 461
Leonardo Lagoeiro and Paola Barbosa
Rolling and Annealing Textures of Silver Sheets 469
Dong Nyung Lee, Heung Nam Han, and Se-Jong Kim
Function of Layer Thickness on the Microstructural Evolution in Copper of
Annealed Roll-Bonded CuNb Composites 481
S.C.V. Lim and A.D. Rollett
Influence of Taylor Factor M on Recrystallization of The Cube and
Cube-Family Grains in FCC Metal 489
Hiroaki Masui
Multi-Cycle Pinch Welding of 304L Tubes: lnhomogeneities in Deformation and
Recrystallization Textures and Microstructures 499
C.T. Necker, A.N. Marchi, and M.G. Smith
Effect of Mg Concentration on Texture Formation in AI-Mg Alloys during High
Temperature Compression 507
Kazuto Okayasu, Hiroki Takekoshi, Masayuki Sakakibara, and Hiroshi Fukutomi
Ultra-Fine Grain Austenitic Stainless Steels: Influence of Texture during
Recrystallization 515
Angeline Poulon-Quintin, Stephanie Brochet, Jean-Bernard Vogt,
Jean-Christophe Glez, and Jean-Denis Mithieux
Patterns of Deformation and Associated Recrystallization in Warm/Hot
Deformed AA6022 523
S. Raveendra, S. Mishra, H. Weiland, and I. Samajdar
Studies on Texture and Microstructure of Cryorolled and Annealed Cu-5%AI,
Cu-5%Zn Alloys 529
V.L. Niranjani, Nilesh Gurao, U. Wendt, S. Suwas, and V. Subramanya Sarma
Modeling of Texture Development during Tandem Hot Rolling of AA3 1 03 537
C. Schafer, V. Mohles, and G. Gottstein
Texture Modification in Asymmetrically Rolled Aluminum Sheets 547
Jurij Sidor, Roumen Petrov, Alexis Miroux, and Leo Kestens
In-Situ SEM/EBSP Analysis during Annealing in AI-Mg Alloys 555
Yoshimasa Takayama, Kazuhiro Morita, Hajime Kato, and Yoshimasa Ookubo
Oriented Grain Growth and the Effect of In-Situ Annealing on Texture in
AlMn Alloys 561
Caterina E. Tommaseo and H. Klein
Subgrain Coarsening of Hot-Rolled AA5005 Aluminum Alloy: A Comparison
between EBSD Observations and Monte Carlo 569
Shengyu Wang, Mohammed H. Alvi, and Anthony D. Rollett
Influence of Low Angle Grain Boundaries on Recrystallization 577
Myrjam Winning and Dierk Raabe
BIOMATERIALS
Comparison of Calcite Crystallographic Texture in the Shells of the
Rhynchonelliform Brachiopod, Terebratulina Retusa and the Bivalve Mollusc,
Mytilus Edulis 587
M.Cusack, A. Perez-Huerta, P. Dalbeck, P. Chung, and M.R. Lee
Wear Resistance and Texture Evolution of Ultra High Molecular Weight
Polyethylenes during Uniaxial Compression 595
D.S. Li, H. Garmestani, S.C. Davis, L.K. Moss, A.K. Siddiqi, J.B. Guthrie,
N. Johansen, and L. Matrisciano
Texture and Microstructure of Modern Rhynchonellide Brachiopod Shells-An
Ontogenetic Study 605
E. Griesshaber, R.D. Neuser, U. Brand, and W.W. Schmahl
Peering Into the Eyes of Trilobites using EBSD 619
C. Torney, M.R. Lee, and A.W. Owen
Texture and Anisotropy of MP35N Wire for Conduct Leads 627
Bernard Q. Li and Tom Steigauf
Crystallographic Textures from the Exoskeleton of the Lobster Hornarus
Arnericanus and Calculation of the Mechanical Properties of the Calcite
Phase 637
L. Raue, H. Klein, D. Raabe, and H. Fabritius
TEXTURE EFFECTS ON DAMAGE ACCUMULATION
Experimental Characterization of the Effect of Crystallography on the Three
Dimensional Nucleation and Growth of Fatigue Cracks in Metals 657
J-Y. Buffiere, E. Ferrie, H. Proudhon and W. Ludwig
Reversible Texture Transition during Accumulative Roll Bonding 669
N