Fluid Mechanics and Heat Transfer
Inexpensive Demonstrations and Laboratory Exercises
Herausgeber: Penney, William Roy; Clausen, Edgar C
Fluid Mechanics and Heat Transfer
Inexpensive Demonstrations and Laboratory Exercises
Herausgeber: Penney, William Roy; Clausen, Edgar C
- Broschiertes Buch
- Merkliste
- Auf die Merkliste
- Bewerten Bewerten
- Teilen
- Produkt teilen
- Produkterinnerung
- Produkterinnerung
This title is an ideal resource for chemical engineering, mechanical engineering, or engineering technology professors or instructors starting a new laboratory or in need of inexpensive demonstrations of selected heat transfer or fluids principles for the classroom.
Andere Kunden interessierten sich auch für
- Fuel Production with Heterogeneous Catalysis97,99 €
- Chun HuhPractical Nanotechnology for Petroleum Engineers60,99 €
- Alireza BahadoriDictionary of Oil, Gas, and Petrochemical Processing139,99 €
- Bojidarka IvanovaLinearly Polarized IR Spectroscopy112,99 €
- Nanogenerators82,99 €
- Engineering of Polymers and Chemical Complexity, Volume I99,99 €
- Membrane Engineering for the Treatment of Gases318,99 €
-
-
-
This title is an ideal resource for chemical engineering, mechanical engineering, or engineering technology professors or instructors starting a new laboratory or in need of inexpensive demonstrations of selected heat transfer or fluids principles for the classroom.
Produktdetails
- Produktdetails
- Verlag: CRC Press
- Seitenzahl: 236
- Erscheinungstermin: 12. Februar 2018
- Englisch
- Abmessung: 234mm x 156mm x 13mm
- Gewicht: 336g
- ISBN-13: 9780815374312
- ISBN-10: 0815374313
- Artikelnr.: 51012935
- Herstellerkennzeichnung
- Libri GmbH
- Europaallee 1
- 36244 Bad Hersfeld
- gpsr@libri.de
- Verlag: CRC Press
- Seitenzahl: 236
- Erscheinungstermin: 12. Februar 2018
- Englisch
- Abmessung: 234mm x 156mm x 13mm
- Gewicht: 336g
- ISBN-13: 9780815374312
- ISBN-10: 0815374313
- Artikelnr.: 51012935
- Herstellerkennzeichnung
- Libri GmbH
- Europaallee 1
- 36244 Bad Hersfeld
- gpsr@libri.de
William Roy Penney currently serves as Professor Emeritus of Chemical Engineering at the University of Arkansas. His research interests include fluid mixing and process design, and he has been instrumental in introducing hands-on concepts into the undergraduate classroom. Professor Penney is a registered professional engineer in the state of Arkansas. Edgar C. Clausen currently serves as Professor and Associate Department Head in Chemical Engineering at the University of Arkansas. His research interests include bioprocess engineering, the production of energy and chemicals from biomass and waste, and enhancement of the K-12 educational experience. Professor Clausen is a registered professional engineer in the state of Arkansas.
Section I Fluid Mechanics Experiments and Demonstrations 1. Determining the
Net Positive Suction Head of a Magnetic Drive Pump 2. Bernoulli Balance
Experiments Using a Venturi 3. Force Produced by Impingement of a Fluid Jet
on a Deflector 4. Applying the Bernoulli Balance to Determine Flow and
Permanent Pressure Loss 5. A Simple Sharp-Edged Orifice Demonstration 6.
Depressurization of an Air Tank 7. Draining an Upper Tank into a Lower
Tank: Experimental and Modeling Studies 8. Determining the Pump Curve and
the Efficiency for a Bomba BP-50 Regenerative Centrifugal Pump Section II
Heat Transfer Experiments and Demonstrations 9. Thermal Conductivity and
Radiative Experiments Measurement 10. Free Convection Heat Transfer from
Plates 11. Forced Convection Heat Transfer by Air Flowing over the Top
Surface of a Horizontal Plate 12. Laminar Forced Convection Inside a Coiled
Copper Tube 13. An Experimental Testing of Turbulent Forced Convection
Inside Tubes 14. Forced Convection through an Annulus 15. Experimental
Investigation and Modeling Studies of the Transient Cooling of a Brass Rod
Subjected to Forced Convection of Room Air 16. Solar Flux and Absorptivity
Measurements 17. A Transient Experiment to Determine the Heat Transfer
Characteristics of a 100 W Incandescent Light Bulb, Operating at 48 W 18.
Experimental Determination of a Room Heat Transfer Coefficient by Transient
Cooling of a Mercury-in-Glass Thermometer 19. Experimental Determination
and Modeling of the Temperature Distribution Along a Hollow Fin
Net Positive Suction Head of a Magnetic Drive Pump 2. Bernoulli Balance
Experiments Using a Venturi 3. Force Produced by Impingement of a Fluid Jet
on a Deflector 4. Applying the Bernoulli Balance to Determine Flow and
Permanent Pressure Loss 5. A Simple Sharp-Edged Orifice Demonstration 6.
Depressurization of an Air Tank 7. Draining an Upper Tank into a Lower
Tank: Experimental and Modeling Studies 8. Determining the Pump Curve and
the Efficiency for a Bomba BP-50 Regenerative Centrifugal Pump Section II
Heat Transfer Experiments and Demonstrations 9. Thermal Conductivity and
Radiative Experiments Measurement 10. Free Convection Heat Transfer from
Plates 11. Forced Convection Heat Transfer by Air Flowing over the Top
Surface of a Horizontal Plate 12. Laminar Forced Convection Inside a Coiled
Copper Tube 13. An Experimental Testing of Turbulent Forced Convection
Inside Tubes 14. Forced Convection through an Annulus 15. Experimental
Investigation and Modeling Studies of the Transient Cooling of a Brass Rod
Subjected to Forced Convection of Room Air 16. Solar Flux and Absorptivity
Measurements 17. A Transient Experiment to Determine the Heat Transfer
Characteristics of a 100 W Incandescent Light Bulb, Operating at 48 W 18.
Experimental Determination of a Room Heat Transfer Coefficient by Transient
Cooling of a Mercury-in-Glass Thermometer 19. Experimental Determination
and Modeling of the Temperature Distribution Along a Hollow Fin
Section I Fluid Mechanics Experiments and Demonstrations 1. Determining the
Net Positive Suction Head of a Magnetic Drive Pump 2. Bernoulli Balance
Experiments Using a Venturi 3. Force Produced by Impingement of a Fluid Jet
on a Deflector 4. Applying the Bernoulli Balance to Determine Flow and
Permanent Pressure Loss 5. A Simple Sharp-Edged Orifice Demonstration 6.
Depressurization of an Air Tank 7. Draining an Upper Tank into a Lower
Tank: Experimental and Modeling Studies 8. Determining the Pump Curve and
the Efficiency for a Bomba BP-50 Regenerative Centrifugal Pump Section II
Heat Transfer Experiments and Demonstrations 9. Thermal Conductivity and
Radiative Experiments Measurement 10. Free Convection Heat Transfer from
Plates 11. Forced Convection Heat Transfer by Air Flowing over the Top
Surface of a Horizontal Plate 12. Laminar Forced Convection Inside a Coiled
Copper Tube 13. An Experimental Testing of Turbulent Forced Convection
Inside Tubes 14. Forced Convection through an Annulus 15. Experimental
Investigation and Modeling Studies of the Transient Cooling of a Brass Rod
Subjected to Forced Convection of Room Air 16. Solar Flux and Absorptivity
Measurements 17. A Transient Experiment to Determine the Heat Transfer
Characteristics of a 100 W Incandescent Light Bulb, Operating at 48 W 18.
Experimental Determination of a Room Heat Transfer Coefficient by Transient
Cooling of a Mercury-in-Glass Thermometer 19. Experimental Determination
and Modeling of the Temperature Distribution Along a Hollow Fin
Net Positive Suction Head of a Magnetic Drive Pump 2. Bernoulli Balance
Experiments Using a Venturi 3. Force Produced by Impingement of a Fluid Jet
on a Deflector 4. Applying the Bernoulli Balance to Determine Flow and
Permanent Pressure Loss 5. A Simple Sharp-Edged Orifice Demonstration 6.
Depressurization of an Air Tank 7. Draining an Upper Tank into a Lower
Tank: Experimental and Modeling Studies 8. Determining the Pump Curve and
the Efficiency for a Bomba BP-50 Regenerative Centrifugal Pump Section II
Heat Transfer Experiments and Demonstrations 9. Thermal Conductivity and
Radiative Experiments Measurement 10. Free Convection Heat Transfer from
Plates 11. Forced Convection Heat Transfer by Air Flowing over the Top
Surface of a Horizontal Plate 12. Laminar Forced Convection Inside a Coiled
Copper Tube 13. An Experimental Testing of Turbulent Forced Convection
Inside Tubes 14. Forced Convection through an Annulus 15. Experimental
Investigation and Modeling Studies of the Transient Cooling of a Brass Rod
Subjected to Forced Convection of Room Air 16. Solar Flux and Absorptivity
Measurements 17. A Transient Experiment to Determine the Heat Transfer
Characteristics of a 100 W Incandescent Light Bulb, Operating at 48 W 18.
Experimental Determination of a Room Heat Transfer Coefficient by Transient
Cooling of a Mercury-in-Glass Thermometer 19. Experimental Determination
and Modeling of the Temperature Distribution Along a Hollow Fin